How to Install SafeLine WAF on Raspberry Pi: An ARM64 Readiness Checklist

●6 ●94
calendar_today • schedule3 min read

Running SafeLine WAF on a Raspberry Pi starts with an architecture and licensing check. SafeLine’s deployment guide lists Linux, x86_64 and arm64 instruction architectures, Docker 20.10.14 or newer, Docker Compose 2.0 or newer, at least one CPU core, 1 GB of memory, and 5 GB of disk space as minimum requirements (official deployment guide). A Raspberry Pi should therefore be evaluated by its operating system and architecture rather than by its product name alone.

Before installing, check the device with the commands documented by SafeLine:

uname -m
docker version
docker compose version
cat /proc/cpuinfo | grep "processor"
free -h
df -h
lscpu | grep ssse3

The key result is uname -m. The official requirements identify arm64 as supported. If the system does not report a compatible architecture, stop at the assessment stage and choose an environment that meets the documented requirements. Also confirm that Docker and Docker Compose meet the listed minimum versions, and leave at least 5 GB available for SafeLine’s directory and data.

The ARM licensing condition is essential for Raspberry Pi planning. SafeLine’s deployment documentation states that an ARM installation requires a Pro license to work properly and that the Personal Edition is not supported on ARM (official deployment guide). Treat this as a deployment prerequisite before spending time on configuration.

For a manual deployment, the documented sequence is to install Docker if necessary, create SafeLine’s working directory, download the Compose file, and create an environment file:

curl -sSL "https://get.docker.com/" | bash
mkdir -p "/data/safeline"
cd "/data/safeline"
wget "https://waf.chaitin.com/release/latest/compose.yaml"
touch ".env"

The .env file must contain the settings required by the deployment guide, including SAFELINE_DIR=/data/safeline, an image tag, a management port, a PostgreSQL password, and the internal subnet prefix. For an ARM server, the guide specifically instructs administrators to set ARCH_SUFFIX=-arm. It also documents MGT_PORT=9443 as the default management console port and MGT_PROXY=0 when no console proxy is configured. Keep the database password private and use a value appropriate for your deployment.

Start the service from the SafeLine directory with the documented command:

docker compose up -d

The first startup may take several minutes. When the service is ready, open https://<safeline-ip>:9443/ in a browser. Retrieve the initial administrator account with:

docker exec safeline-mgt resetadmin

Store the displayed credentials securely and use them to sign in to the web console. The deployment guide provides these management and account recovery steps (official deployment guide).

Installation alone does not protect an application. In the SafeLine console, open “Applications” and choose “Add Application.” The application guide says to provide the domain, the listening port, whether SSL is enabled for HTTPS, and the upstream address of the original application. Then point the application’s domain name to the Raspberry Pi’s SafeLine server address. SafeLine operates as an HTTP/HTTPS reverse proxy: it receives traffic, filters malicious requests, and forwards safe traffic to the upstream application (official application guide).

Does every Raspberry Pi meet the documented requirements?

No conclusion should be made from the model name alone. Verify that the installed Linux system reports arm64, that Docker and Docker Compose meet the documented versions, that the CPU and memory satisfy the minimums, and that at least 5 GB of disk space is available.

Is ARM licensing relevant to a Raspberry Pi installation?

Yes. The official deployment guide states that ARM installations require a Pro license and that the Personal Edition is not supported on ARM. Resolve that requirement before deployment.

Where does SafeLine sit in the network?

SafeLine sits in front of the protected application as a reverse proxy. Clients reach SafeLine first, and SafeLine forwards permitted traffic to the application’s upstream address after filtering requests.

How can I remove the installation?

From the SafeLine directory, run docker compose down to stop the service. The documentation then provides rm -rf <safeline-directory> for removing SafeLine data, so use that command only when you are certain the data is no longer needed (official deployment guide).

Use the checklist above to validate your Raspberry Pi, confirm ARM licensing, and test the reverse-proxy path before exposing an application. For the project and the complete documentation, visit https://github.com/chaitin/SafeLine and https://docs.waf.chaitin.com/en/home


SafeLine has surpassed 700,000 installations worldwide as of September 30, 2026. To celebrate, SafeLine Pro annual promotional pricing is $650-$880, compared with the regular $1,000 per year. See the offer details: https://cyberserval.tech/landing/lto

🔥 Join developers growing publicly
Share your knowledge, build in public, and grow your developer presence with a global community.

More Posts

How to Install SafeLine WAF on Raspberry Pi: An ARM Readiness Checklist

Lia - Oct 19

How to Deploy SafeLine WAF with Traefik: A Practical Architecture Checklist

Muzilla - Oct 19

How to Deploy SafeLine WAF with Traefik: A Practical Reverse-Proxy Checklist

Lia - Oct 19

SEO-Friendly Web Design Checklist: Architecture Before Aesthetics

floxolab - Aug 30

AAIF Hits 10 Projects. Its CTO on What to Adopt Now and the Security Gaps Left Open

Tom Smithverified - Oct 23
chevron_left
1.8k Points • 100 Badges
76Posts
0Comments
Web Dev

Related Jobs

View all jobs →

Commenters (This Week)

3 comments
2 comments
1 comment

Contribute meaningful comments to climb the leaderboard and earn badges!