MT5 Lot Check: Two Separate Tests — Estimated Loss at Stop vs Required Margin

Leader ●1 ●11 ●30
calendar_today ago • schedule4 min read
— Originally published at guetaquant.com

A position size in MetaTrader 5 needs two independent checks: how much you would lose if price closed at your stop, and how much margin opening it requires. A volume can pass one and fail the other. OrderCalcProfit() and OrderCalcMargin() give those estimates in account currency under current conditions — neither guarantees a future fill or caps your loss.

Educational content: simulation checks only, no signals, no return claims.

By Mahdi Goodarzi (g.dev/mahdigoodarzi), Gueta Quant — full Spanish guide with contract-spec sources at guetaquant.com/blog/verificar-riesgo-margen-mt5.

Two separate MT5 checks for a candidate lot: estimated loss at stop vs required margin


1. Why lot size alone answers neither question

Lot = volume, not money. To convert volume to money you still need instrument, direction, entry price, assumed exit price, account currency and provider conditions. Margin adds another layer: contract rules and account mode. A risk-% formula alone gives false precision.

Check Market Watch → Specification for the exact symbol on your account: contract size, tick size/value, profit currency, calculation mode, min volume and step. Do not copy specs from another broker. MT5 symbol specification docs. The budgeting side is covered in our position-sizing guide — here we verify a candidate volume with two separate outputs.

2. Test 1: estimated loss to an assumed exit

OrderCalcProfit() takes direction (BUY/SELL), symbol, volume, open price and a hypothetical close price. It returns an account-currency estimate plus a success/error flag. For a stop check, pass the stop level as the close price and confirm the result is a loss. If the call fails, the result is not zero — the test is unresolved.

For a buy, use buy entry and a lower assumed close; for a sell, sell entry and a higher assumed close. The MQL5 reference warns the math depends on symbol type — which is why a universal "pips × dollars" formula breaks across Forex, CFDs and futures.

// MQL5 — Test 1: loss estimate to stop (illustrative, check return codes)
double loss_estimate = 0.0;
bool ok = OrderCalcProfit(ORDER_TYPE_BUY, _Symbol, candidate_volume,
                         entry_price, stop_price, loss_estimate);
if(!ok)
   Print("OrderCalcProfit failed, test unresolved. Error: ", GetLastError());
// loss_estimate < 0 means a loss in account currency under current conditions

This says nothing about execution at the stop. Slippage, gaps, commissions and swaps change the realized loss. Confusing pip, point and tick also invalidates manual conversion — see our synthetic-indices lot limits note.

3. Test 2: estimated margin for the same volume

OrderCalcMargin() takes direction, symbol, the same candidate volume and entry price. It returns estimated margin in account currency. Documented limit: it computes the requirement for the proposed trade ignoring pending orders and open positions. Comparing it to total balance does not prove the account can take a live order.

// MQL5 — Test 2: margin estimate (same candidate volume)
double margin_estimate = 0.0;
bool ok2 = OrderCalcMargin(ORDER_TYPE_BUY, _Symbol, candidate_volume,
                          entry_price, margin_estimate);
if(!ok2)
   Print("OrderCalcMargin failed, test unresolved. Error: ", GetLastError());

For a fuller pre-check of a concrete request (funds + request parameters), see OrderCheck() — even passing it does not guarantee execution. Our margin calculator explores assumptions; provider conditions and live account state still decide.

4. Decision example with fictitious numbers

Simulation account, loss budget USD 3 and internal margin cap USD 50 for this one position. Not recommended thresholds — chosen only to show the method. With a hypothetical symbol (USD 8 modeled loss and USD 180 modeled margin per lot):

Candidate volume Est. loss at stop Est. margin Decision under both caps
0.30 lots USD 2.40 USD 54 FAIL: exceeds margin cap
0.20 lots USD 1.60 USD 36 PASS both
0.10 lots USD 0.80 USD 18 PASS both

Values are constructed (0.30 × 8 = 2.40; 0.30 × 180 = 54), not from a live MT5 account or real broker. Never use USD 180 as a rule for a real symbol. On a real account, plug your own prices and volume into the functions or a tool applying contract specs, and log both results with date and symbol.

The 0.30 case is the lesson: fitting the loss budget does not imply fitting the margin cap. If a volume falls below the provider minimum, do not auto-bump it to minimum — re-run both tests. Our MT5 lot calculator explores an initial size but does not replace this margin check.

# Python — reproduce the decision table (no packages needed)
from decimal import Decimal as D
LOSS_PER_LOT, MARGIN_PER_LOT = D("8"), D("180")
for lots in [D("0.30"), D("0.20"), D("0.10")]:
    print(lots, float(lots*LOSS_PER_LOT), float(lots*MARGIN_PER_LOT))
# 0.30 -> 2.40 / 54.0 | 0.20 -> 1.60 / 36.0 | 0.10 -> 0.80 / 18.0

5. Minimum verification sheet

Before marking a candidate volume as coherent for simulation, log: symbol + account type; account currency; direction; entry + assumed exit; volume + allowed step; loss budget; OrderCalcProfit() result + return status; OrderCalcMargin() result + return status; free margin + existing positions; costs the estimates exclude. Re-run if quote, contract or account conditions change.

Missing data, a failed call, or a result contradicting the specification = not verified. This is a pre-trade coherence control, not a buy/sell signal and not a guaranteed max-loss system.


Study material under Colombia SFC Decreto 2555 de 2010 — financial-engineering education, not investment advice. No signals, no managed accounts. Related: MT5 position sizer · MT5 backtesting guide · Entry price changes the lot in MT5.

🔥 Join developers growing publicly
Share your knowledge, build in public, and grow your developer presence with a global community.

More Posts

The Zero-Net-Loss Fleet & The Mercenary Squad: A Live AI Economy

DEVPlank - Aug 4

Stop invoking the whole graph to test one node: unit tests and checkpoints for my LangGraph agent

VEACESLAV - Nov 10

Your AI Doesn't Just Write Tests. It Runs Them Too.

Kevin Martinez - May 12

Dashboard Operasional Armada Rental Mobil dengan Python + FastAPI

Masbadar - Mar 12

Algorithmic Risk Management in MT5: ATR Volatility Position Sizing & MQL5 Architecture

Guetaquant - Sep 9
chevron_left
1.6k Points • 42 Badges
Bogotá, Colombia • guetaquant.com
15Posts
2Comments
13Connections
Founder & Lead Quantitative Engineer at Gueta Quant (https://guetaquant.com).

I design open-source... Show more

Related Jobs

View all jobs →

Commenters (This Week)

5 comments
2 comments
1 comment

Contribute meaningful comments to climb the leaderboard and earn badges!